Ambulances, firetrucks and police cars, oh my! You’re bound to see these vehicles driving to emergency scenes, and it’s important to know what to do to stay safely out of the way. Vermont law states that when you see an emergency vehicle driving with its emergency lights and siren on, you must pull to the right and come to a complete stop. This clears the road and allows the emergency vehicle to reach its destination quickly and safely. If drivers don’t pull over, or they pull to the left instead of the right, the chances of a collision increase.
You may be surprised that we’re spending time writing an article on what seems like such a simple topic, and I hope that many of you reading this article already know and follow the law by pulling to the right and coming to a complete stop. However, I’ve seen countless drivers fail to move over and stop. Take a moment here, dear reader, to pause and think about how it would affect you if it was you or a loved in our ambulance and a car did not yield. Lights and siren are only used when necessary because it increases the risk of a collision between the emergency vehicle and the public. If we are using emergency lights and siren it means someone needs help right away, and time is of the essence. So please, when you see any emergency vehicle with its emergency lights and siren on, pull to the right and come to a complete stop. Wait for the vehicle to pass and take an extra moment to check for other emergency vehicles before you reenter the lane. It only takes a moment and you could save a life.
I spoke with one of our drivers at Essex Rescue to get her take on what drivers do that bothers her the most. Michelle Turner has been with Essex Rescue for four years and has been driving the ambulance for three years. She reiterated that drivers not pulling to the right and coming to a complete stop is a daily issue. Michelle also noted that intersections with two lanes of traffic heading in the same direction tend to be tricky. The drivers in the right lane pull to the right, but the drivers in the left lane often pull to the left. While theoretically this clears the center of the road, the opening is often not large enough to move through quickly and safely with our wide ambulances, and since ambulance drivers are trained to always go left it can be dangerous to have cars pulling to the left as well. For this reason, both lanes should move to the right. Cars in left turn only lanes also need to move to the right, something Michelle says she often sees them fail to do. When they refuse to move to the right this can force the ambulance even further to the left and out into opposing traffic. While opposing traffic should also be pulling to the right and coming to a complete stop, it is still more dangerous for the ambulance to drive in the opposing lane than the lane of travel.
It comes down to safety. The safety of the ambulance crew, the patient, the other drivers, of any other emergency vehicle operators and of cyclists and pedestrians near the roadway. Keep yourself and others safe by pulling as far to the right as possible, coming to a complete stop, and checking that the lane is clear before you reenter. If we all work together we can get emergency vehicles to where they need to be in a timely manner and we can all stay safe while doing so.
As always, if you are interested in being an EMT or a driver with Essex Rescue please contact Joe Congdon at 878-4859 ext 7. We would love to have you!
“To the Rescue” is a monthly column provided by Essex Rescue.
Comments
No comments on this item Please log in to comment by clicking here